Sort By

200507-F-LS255-0003.JPG

The first wave of Airmen from the active duty 388th and Reserve 419th Fighter Wings returned home to Hill Air Force Base, Utah, May 7, 2020, following a six-month deployment to the Middle East. (U.S. Air Force Photo by Todd Cromar)

Details Download

200427-F-LS255-0007.JPG

An F-35A Lightning II from the 388th Fighter Wing at Hill Air Force Base, Utah, takes off for Eielson Air Force Base, Alaska, April 27. Four fighter jets from Hill will be on loan to the 354th Fighter wing at Eielson as they stand up F-35A operations. More jets on hand at Eielson allows for more operational and maintenance training. (U.S. Air Force photo by Todd Cromar)

Details Download

200427-F-LS255-0002.JPG

A pilot from the 354th Fighter Wing at Eielson AFB, Alaska, performs pre-flight checks in an F-35A Lightning II from the 388th Fighter Wing at Hill Air Force Base, Utah, April 27. Four fighter jets from Hill will be on loan to the 354th FW at Eielson as they stand up F-35A operations. More jets on hand at Eielson allows for more operational and maintenance training. (U.S. Air Force photo by Todd Cromar)

Details Download

200427-F-LS255-0003.JPG

An F-35A Lightning II pilot from the 354th Fighter Wing at Eielson AFB, Alaska, salutes a crew chief from the 388th Fighter Wing at Hill AFB, Utah, prior to takeoff April 27. For F-35As from the 388th FW will be on loan to the 354th FW to assist with operational and maintenance training as they stand up operations there. (U.S. Air Force photo by Todd Cromar)

Details Download

200406-F-EF974-1007.JPG

A 3D printer lays down layer of plastic at the start of a manufacturing run that will eventually be an N-95 respirator. Airmen in the 388th Maintenance Group's Air Force Repair and Enhancement Program are using the technology to create the masks, which can be work in mission-essential work environments where social distancing is not possible. (U.S. Air Force photo by Cynthia Griggs)

Details Download

200406-F-EF974-1015.JPG

3D printed parts for N-95 style face masks are laid out in front of a computer design used to control the printer. Airmen in the 388th Maintenance Group’s Air Force Repair and Enhancement Program are using 3D printing to create more masks that can be worn in mission-essential work areas where it may be difficult to maintain the recommended 6-feet of social distance. (U.S. Air Force photo by Cynthia Griggs)

Details Download

200406-F-EF974-1027.JPG

Senior Airman Brett House, 388th Maintenance Squadron, shows a completed N-95 style mask created with a 3D printer. The masks are printed with a plastic materiel that can be repeatedly sanitized with alcohol. Each mask is made of three separately printed pieces – the main body, an internal grid and an external cap that holds a filter. Airmen have had to get creative with the rest of the assembly. The filters are individually cut to specifications from home air filters. The straps that secure the masks to the face are cut from elastic cords. Weather stripping is cut and formed around the interior edge of each mask to create a seal. (U.S. Air Force photo by Cynthia Griggs)

Details Download

200320-F-LS255-0004.JPG

Airmen continue to fly and train with the F-35A Lightning II at Hill Air Force Base, Utah, despite the current Coronavirus crisis. (U.S. Air Force photos by Todd Cromar)

Details Download

200312-F-LS255-0006.JPG

Airmen continue to fly and train with the F-35A Lightning II at Hill Air Force Base, Utah, despite the current Coronavirus crisis. (U.S. Air Force photos by Todd Cromar)

Details Download

200312-F-LS255-0007.JPG

Airmen continue to fly and train with the F-35A Lightning II at Hill Air Force Base, Utah, despite the current Coronavirus crisis. (U.S. Air Force photos by Todd Cromar)

Details Download

200312-F-LS255-0001.JPG

Airmen continue to fly and train with the F-35A Lightning II at Hill Air Force Base, Utah, despite the current Coronavirus crisis. (U.S. Air Force photos by Todd Cromar)

Details Download

200301-F-ND574-0007

Capt. Kristin "BEO" Wolfe, F-35A Lightning II Demonstration Team pilot and commander finishes a demonstration practice at Davis-Monthan Air Force Base during the Air Force Heritage Flight Training Course, Feb. 29, 2020. The Heritage Flight Training Course is a training course for all single-ship aerial demonstration teams prior to the upcoming summer air show season. (U.S. Air Force Photo by Staff Sgt. Zachary Boyer)

Details Download

200207-F-EF974-1100

Airman 1st Class Sergio Moreno-Garcia, assigned to 421st Aircraft Maintenance Unit with the 388th Fighter Wing, eyes a weapon line-up during the Load Crew of the Year competition Feb. 7, 2020, at Hill Air Force Base, Utah. The load crew competition requires teams of three Airmen to load weapons onto a F-35A Lightning II as quickly and accurately as possible within a 37.5 minute time frame. (U.S. Air Force photo by Cynthia Griggs)

Details Download

200207-F-EF974-1073

Senior Airman Eustacio Marquez, assigned to 4th Aircraft Maintenance Unit with the 388th Fighter Wing, attaches a GBU-49 bomb onto a F-35A Lightning II during the Load Crew of the Year competition Feb. 7, 2020, at Hill Air Force Base, Utah. The load crew competition requires teams of three Airmen to load weapons as quickly and accurately as possible within a 37.5 minute time frame. (U.S. Air Force photo by Cynthia Griggs)

Details Download

200207-F-EF974-1079

Airman 1st Class Carl Dowell, assigned to 421st Aircraft Maintenance Unit with the 388th Fighter Wing, guides a GBU-31v3 Joint Direct Attack Munition during the Load Crew of the Year competition Feb. 7, 2020, at Hill Air Force Base, Utah. The load crew competition requires teams of three Airmen to load weapons onto a F-35A Lightning II as quickly and accurately as possible within a 37.5 minute time frame. (U.S. Air Force photo by Cynthia Griggs)

Details Download

200106-F-LS255-0012.JPG

F-35A Lightning II aircraft from the active duty 388th and Reserve 419th Fighter Wings taxi at Hill Air Force Base, Utah, during a recent combat exercise. Airmen from the 421st Fighter Squadron are leaving this week to participate in Red Flag 20-1 at Nellis Air Force Base, Nevada. The exercise is the Air Force's premier combat exercise and pits two large forces against each other to simulate realistic combat scenarios. U.S. Air Force photo by Todd Cromar)

Details Download

200106-F-LS255-0017.JPG

An F-35A Lightning II aircraft takes off from Hill Air Force Base, Utah, during a recent combat exercise. Airmen from the 421st Fighter Squadron are leaving this week to participate in Red Flag 20-1 at Nellis Air Force Base, Nevada. The exercise is the Air Force's premier combat exercise and pits two large forces against each other to simulate realistic combat scenarios. U.S. Air Force photo by Todd Cromar)

Details Download

190710-F-BN045-004.JPG

Capt. Kristen Wolfe, a pilot with the 388th Fighter Wing's 34th Fighter Squadron, prepares for a mission in an F-35A Lightning II at Mountain Home Air Force Base, Idaho. The squadron will participate in Gunfighter Flag 19-2 here from July 12-19. (U.S. Air Force photo by Micah Garbarino)

Details Download

190710-F-BN045-001.JPG

Senior Airman Cheyenne Rust, an F-35A crew chief with the 388th Fighter Wing's 34th Fighter Squadron, currently deployed to Mountain Home Air Force Base, Idaho, marshals a jet prior to the first sorties of the day July 10. (U.S. Air Force photo by Micah Garbarino)

Details Download

190710-F-BN045-001.JPG

F-35A Lightning II aircraft, assigned to the 388th Fighter Wing at Hill Air Force Base, Utah, sit on the ramp at Mountain Home AFB, Idaho, prior to the first sortie of the day July 11. The 34th Fighter Squadron is operating out of Mountain Home while Hill's runway is under construction. (U.S. Air Force photo by Micah Garbarino)

Details Download